Clips from the previous videos I made on the teardown and rebuild of my Series 1, 2HP Variable Speed Bridgeport Milling Machine.
Part 1 – Plan of Attack – https://youtu.be/58QsISzIyug
Part 2 – Disassemble Table, Saddle and Knee – https://youtu.be/YTp7iroJudA
Part 3 – Installing the Knee – https://youtu.be/jV24bw2-Jn4
Part 4 – Bijur One Shot Lube – https://youtu.be/DHokyE0aau0
Part 5 – Installing Saddle and Oil Lines – https://youtu.be/nO1g4voauBs
Part 6 – Installing the Table – https://youtu.be/urXtZ8n0O7I
Part 7 – Disassemble the 6F Power Feed – https://youtu.be/tCxqoBAn_Uo
Part 8 – Assembling the 6F Power Feed – https://youtu.be/RSEoDSl4eIk
Part 9 – 6F Power Feed Electronics – https://youtu.be/hbDeA0A19l0
Part 10 – Building a Bench Bracket – https://youtu.be/rUbECHNe4dw
Part 11 – Disassemble Top End – https://youtu.be/dAHU-Hv3-tQ
Part 12 – Disassemble the Quill Housing – https://youtu.be/xNQuSNrBJYc
Part 13 – Assembling the Quill Housing – https://youtu.be/teh9zwziGsE
Part 14 – Assembling the Top End – https://youtu.be/C-_rlCM0csU
Part 15 – Turret, Ram and Putting it Back Together – https://youtu.be/Kd12SUEg7S4
#bridgeport #millingmachine #rebuild