Picked up these new 12 ton jack stands for a project I’m working on. These should work great!
.
.
.
.
.
.
.
.
@aprilfools
Checking one more thing off the EJS 2019 prep list.
Checking one more thing off the EJS 2019 prep list. Custom steering stabilizer mount. A friend made these tabs on his plasma. A little chewing gum and some JB Weld and voila!
.
.
.
Won’t be long now! EJS 2019 here we come!
Noticed this crack in the passenger side rear shock mount.
Noticed this crack in the passenger side rear shock mount. You can see where the metal had been thinned from too many scrapes on the rocks. I drilled out the end of the crack, welded it shut and cleaned it up with a grinder. .
.
.
.
Getting things trail ready again
Feels good to finally putting stuff back on the Mule instead of taking them off
Feels good to finally putting stuff back on the Mule instead of taking them off or watching it collect dust. 😂 The acceleration of the shop build date put me behind on the Jeep. Taking a break from construction and back on assembly. .
.
.
.
Man doors and overhead door are in on the shop.
Man doors and overhead door are in on the shop. Time to take a break and get back to working on the Jeep. EJS is right around the corner!
.
.
.
Concrete has had its relief cuts made.
Concrete has had its relief cuts made. Now to button everything up and get the doors installed.
.
.
.
.
Whoop! Gettin it done!
I had to replace a bushing on one of my Bilstein shocks.
I had to replace a bushing on one of my Bilstein shocks. The bolt rusted to the sleeve and I had to cut it off. Bilstein doesn’t have replacement parts. Boo. I was able to find a @warrior_products part that would work, but the hole for the sleeve is 1/2” and I needed it to be 12mm. So I made a new sleeve out of some bar stock. First real project on a lathe. 😊
.
.
.
.