I have Rugged Ridge wheels on my Jeep that I bought from 4 Wheel Parts a year ago. Rugged Ridge has a rim protector designed to protect the rim when wheeling. My rims have quite a few scratches on them already. I’ve been wanting these protectors for a while.
A friend had a set he wasn’t using, so I finally convinced him to sell them to me. But they were painted Mango Tango. That wasn’t going to work for me. So I painted them blue.
In order to install them, I had to remove these decorative bolts that were already in the rims. They were rounded over and had hex key slots. But 50% of them were so damaged, that I couldn’t get a hex key in the slot at all. Some were so seized in the hole that they were easily stripped. In some cases I was able to hammer in an oversized torx bit in some of them and was able to get them out. For the others, I had to use a Dremel to flatten two sides of the bolt and use a Vice Grip to twist it out.